0.00
(해외배송 가능상품)
Product Name
Clean Room Work Processing
Product Summary
Clean Room Work Processing
Manufacturer
Self-production
Origin
Republic of Korea
Monthly rental fee |
per month (For month(s))
|
---|
Purchase
Frequency
Subscription discount save
(Minimum Order : 1 or more / Maximum Order 0 or less )
Discounted amount of your subtotal will appear when you place your orders.
Clean room Installation method
Clean rooms are widely used in fields such as semiconductors, food, and electronics.
Recently, it has been widely used in general manufacturing plants.
It is applied to create a comfortable environment, prevent defects in manufactured products such as contaminants, and increase the efficiency of cooling and heating.
In a typical factory, construction is often carried out in a semi-clean room format rather than a clean room of about 10,000 CLASS.
Masks and quasi-medical products must also be produced in semi-clean rooms,
and food companies also carry out the production process through semi-clean room facilities in order to be eligible for HACCP.
Basically, in the case of semi-clean room facilities,
1) Flame retardant product panel construction
2) Use of aluminum or stainless steel molding
3) Use rivets when combining mold and panel
4) Use of biosilicon between panels and between panels and aluminum or stainless steel molding.
5) If supply and exhaust facilities and air conditioning and heating devices are installed rather than expensive air conditioning facilities, it can become a quasi-clean room facility.
Once the lighting, firefighting, and air conditioning work is completed, silicone work is done.
[Clean room construction sequence]
1) Mukmegi seaweed
2) Confirmation of ordering party
3) Floor base construction
4) Wall panel construction
5) Installation of electric bolts and upper base
6) Ceiling panel construction
7) Door construction
8) Conduct electrical and fire-fighting work
9) Bio-silicon work
10) On-site completion
Aluminum auxiliary materials and clean room auxiliary materials are used as internal finishing materials for clean room construction such as school research institutes and HACPS.
There are various types such as T bar, U bar, angle, double edge base, single edge base, round mold, corner round, corner point, double bar, etc.
U-bar Urethane U-bar 1/2 base Low double-edged base Double-edged base Single-edged base Angle Lucky mold T-bar Double T-bar J molding Round mold Round angle Corner round mold
Large corner point Corner point Small corner point Large Aluminum subsidiary materials Clean room parts Clean room Clean room parts Aluminum parts Corner points
Clean Room Aluminum 1/2 Base 100T Yuba 30T Yuba 40T Yuba 50T Yuba 52T Yuba 75T Yuba HACCP HACCP Material J Mold J Molding T Bar U Bar G Bar Low Double Edge Base Round Mold
Round Angle Lucky Mold Finishing Bar Base Materials Construction Materials Aluminum Finishing Materials Aluminum Parts Aluminum Materials Aluminum Materials Angle Double-edged Base
Elba single blade base urethane U bar Yuba double T bar corner round mold corner point stand corner point small clean room clean room construction materials
Clean room aluminum Clean room Clean room aluminum Clean room aluminum panel Panel materials
There are no posts to show
There are no posts to show